As an Amazon Associate I earn from qualifying purchases.1. YOSH
YOSH Car Phone Mount Holder Magnetic Air Vent in car Mobile Phone Cradle Magnet for iPhone 12 11 Pro Max XR XS Max X 8 7 6s Plus Samsung S20 S10+ A70 S10 Huawei P30 P20 Pro Xperia Xiaomi Oneplus etc.
YOSH - Wide compatibility yosh smartphone car holder is compatible with cars with horizontal vents such as renault Citroën, Samsung, VW Bmw, HTC, and for smartphones like iPhone, Peugeot, Nokia, Huawei, Motorola, Audi and Skoda and etc.
Xiaomi, oppo, nexus, lg, oneplus, Wiko, GPS and MP3 music players. Anti-scratch rubber soft rubber silicon type: 50D protects both your air vent and phone from scratches. Equipped with superior heat resistance protects YOSH magnetic phone holder from deformation.
Exquisite design small size 40mm-dimension makes YOSH Magnetic Car Phone Mount hardly noticeable while not being used, and will not block your view when driving.
One-hand operation using yosh car phone holder, you can simply attach or remove your phone with one hand. Powerful magnetism the four n50 magnets inside yosh car phone holder provide strong magnetic force, so that YOSH magnetic car phone holder can securely hold your phone or GPS devices like Freelligent, Aonerex, regardless of road vibrations or impacts. It’s also very convenient for you to adjust the angle of your device.
Brand | YOSH |
Manufacturer | YOSH |
Height | 3.7 cm (1.46 Inches) |
Length | 4.5 cm (1.77 Inches) |
Weight | 0.04 kg (0.08 Pounds) |
Width | 4.5 cm (1.77 Inches) |
Part Number | YS-JP-CZ-001-1P |
Model | CH101 |
Warranty | Warranty & Support: YOSH provides an 18-Month Warranty for all of our products. |
2. Beikell
Car Phone Holder, Beikell Adjustable Car Phone Mount Cradle 360° Rotation, Phone Holder for Car with One Button Release and Strong Sticky Gel Pad for Mobile Phones from 4.7 to 6.5 inches
Beikell - Durable and full protection: the heat resistant PC material makes our phone holder more stable than other supports on the market. Secure stable install: - extra strong suction cup with super sticky gel pad sticks securely on the dashboard or most flat surfaces.
Position your phone at the perfect angle to enjoy a more relaxed and safer drive. Preventing from blocking your view while driving.
Extendable arm: - the telescopic arm can extend to your desire length and pivot up or down for optimal viewing. Remove easily by pulling the suction pad without leaving any nasty mark.
The silicone arms of the holder protect your phone from scratches and prevent it from falling while driving. Versatile viewing: - highly-flexible ball-joint 360° rotation provides infinite viewing angles. Convenient lock and release: - One-button release system enable you to lock or release your phone with just one hand operation.
Brand | Beikell |
Manufacturer | Beikell |
Height | 6.5 cm (2.56 Inches) |
Length | 13 cm (5.12 Inches) |
Weight | 0.03 kg (0.07 Pounds) |
Width | 8.5 cm (3.35 Inches) |
Part Number | B6007 |
Model | B6007 |
3. Autkors
Autkors Car Phone Holder, Air Vent Car Phone Mount 360 Degrees Rotation Auto Lock Cell Phone Cradle Compatible for Mobile Phones from 4.7 to 6.5 inches.
Autkors - Stable design: this holder will keep your phone stable and prevent it from falling off or shaking with triangle look design. This triangular phone mount is stable, durable and flexible to meet the needs of all drivers. You can set the optimum viewing angle of ball head for safe driving.
Non-slip and high-quality: the clamps of the car holder are made of aluminum alloy, the back plate of non-slip material and there is no risk of scratching. Wide compatibility: the side clamps are suitable for 62 to 80 mm mobile phones and are suitable for most smartphones and gps devices for a stable grip.
There is a charging port at the bottom of the stand that allows you to connect your phone to the charging cable or audio cable without removing the phone from the stand. Once assembled, you can change the orientation of the holder with just one hand to drive safely.
Super stable and durable. Unimpeded charging port: there is a charging port at the bottom of the holder, which allows you to connect the mobile phone to the charging line or audio line. Autkors car phone holder design takes into account every detail to make life easier. Without removing the mobile phone from the holder, you can easily charge the mobile phone without interfering with normal operation. Freely adjustable: the ball head of the holder can be freely rotated 360 degrees and adjusted 45 degrees up and down.
Brand | Autkors |
Manufacturer | Autkors |
Height | 8.2 cm (3.23 Inches) |
Length | 10.9 cm (4.29 Inches) |
Weight | 0.05 kg (0.12 Pounds) |
Width | 8.1 cm (3.19 Inches) |
Part Number | A8750 |
Model | EIGELIU |
4. Mpow
Mpow Car Phone Holder, Universal Air Vent Car Phone Mount with One Button Release and Dual-sized Clip for iPhone 12/Pro Max/12 Mini/SE/11 Pro/11/XS Max/XS/XR/X/8/7, Galaxy S20/S10/S9/S8 and More
Mpow - 360° rotatable: the ball joint of the mpow air vent car phone mount allows you to adjust the phone 360° until you find the most comfortable angle. At the same time, the mpow air vent car phone holder will not block the sight, ensuring the safety of driving. Dual-sized clip & square arms: the cross air vent clip features internal high-quality manganese steel and external TPU material, arc-shaped, which can be stably fixed on most horizontal and vertical air vent blades.
The upgraded square arms increase the contact area with the phone and enhance the stability of clamping.
Note: mpowair vent phone holder may not be suitable for non-intensive, or retraction type vents. Widely compatible: mpow air vent car mount is widely compatible with 4. 7"-6. 5" smartphones, sony, nexus, lg, such as iphone iphone 12/ pro max/ 12 mini/11/ 11 pro/ x/ xs/ xs max / 8plus / x/ 8 / 7plus / SE/ 6s/ 6plus, nokia, blackview, pixel, Galaxy S10/ S10+/ S10e/ Note 9/ S9/ S9+, and More.
Easy installation and removal: there is a button on the back of the Mpow air vent mount. You can mount or dismount the phone by simply pressing the button, and then squeeze the arms with one hand to fix the phone. Convenient charging: the support feet of the mpow air vent cell phone holder leave enough space for you to charge, so you don't have to worry about the low battery warning that will affect the normal use of the phone while driving.
Brand | Mpow |
Manufacturer | Mpow |
Height | 7 cm (2.76 Inches) |
Length | 10.5 cm (4.13 Inches) |
Width | 8.5 cm (3.35 Inches) |
Part Number | MPCA040BB |
Model | MPCA040BB |
5. Onco
ONCO Baby Car Mirror for Back Seat, Drive Safe and Monitor your Baby Seat through the Rearview Mirror, 100% Shatterproof Black Baby Car Seat Mirror, Winner MadeForMums Awards for Best Car Baby Mirror.
Onco - The adjustable straps are easy to install and remove. Designed to keep you and your baby safe - thousands of families put their faith in us to make their journeys easier every day. Easy to install - choose between 3 different attachment options to ensure your mirror firmly stays in place and won’t wobble during car journeys.
This makes it a great choice for all car headrests. Award-winning - this rear seat mirror has been awarded by MadeForMums.
Safety first - onco’s baby mirror is made from 100% shatterproof plastic and measures 24. 5 x 17. 5cm - offering you a crystal-clear and wide view of your newborn whilst driving.
Peace of mind - keep an eye on your child in the back seat and provide some additional entertainment for your baby with this handy and durable headrest mirror, designed for safe travel. Adjustable angles - the 360° rotation allows you to modify the mirror’s angles with minimum effort to fit your and your babies needs.
Brand | Onco |
Manufacturer | Onco |
Height | 17.5 cm (6.89 Inches) |
Length | 24.5 cm (9.65 Inches) |
Weight | 0.35 kg (0.77 Pounds) |
Width | 7 cm (2.76 Inches) |
Part Number | 10412285 |
Model | B-20082010 |
Warranty | 30 day (no quibble) money back guarantee! |
6. Auckly
Auckly Wireless Car Charger,Electromagnetic Sense,Qi 15W Fast in Car Wireless Charger Automatic Sensor Phone Holder Vent Mount Compatible for S20/S10,for iPhone 12 Pro Max Mini 11/11 Pro XS/XR etc
Auckly - You can rotate the holders 360 degrees and the screen can be viewed in landscape horizontal orientation. The automatic closing function is realized through foreign object detection FOD. Note: the maximum input power for iPhone is 7. 5 w, optimized from 5V1A to 9V2A, etc. There are 2 metal buttons under the clamping arms, the clamping arms can open and close automatically.
Note: huawei 15W fast charge is not supported. Automatic closing with electromagnetic induction & touch switch with automatic electromagnetic induction, the clamping arms are more stable and with higher technology compared to the old product and will not open again by themselves.
It can even be 15 W requirement: use a QC3. 0 car charger with power over 18 W. Pure aluminum alloy clips & adjustable pallet instead of traditional plastic air outlet opening clips, we use pure aluminum alloy clips that passed our destructive test perfectly. Note: the capacitor battery level is only sufficient for two or three times of switch-ons.
15 w super fast charging & fast heat dissipation 15 w wireless fast charging, with the main control chip hc5703c, LG v50, and for Xiaomi 9, for samsung and other phones with android system it can reach 10 W, and the maximum power reaches 15W. With super capacitor, easy removal of the mobile phone even when the car is stationary & silent motor thanks to the built-in super capacitor, you can still open the clamping arms electrically when the car is stalled and take your mobile phone out easily. The engine is of the c914 type with the latest technology and its noise is less than 20dB, much lower than other similar products.
Brand | Auckly |
Manufacturer | Auckly-0828 |
Height | 5.3 cm (2.09 Inches) |
Length | 11.3 cm (4.45 Inches) |
Weight | 0.17 kg (0.37 Pounds) |
Width | 6.8 cm (2.68 Inches) |
Part Number | Auckly-1-0828 |
7. GETIHU
Universal Magnetic Phone Mount GPS, 360° Dashboard Mobile Phone Holders for Cars, GETIHU Car Phone Holder, Compatible with iPhone 12 11 XS 8 Plus Samsung S20 S10 Note 9 Huawei HTC Motorola Oneplus etc
GETIHU - Universal compatibilityworks perfectly with most car models with only 1. 5*2in flat spot. Super strong adhesive apply premium 3M adhesive pad to keep the phone mount firmly fixed on your car dashboard, despite rough roads, speed bumps or sharp turns. Remove the plate Before wireless charging.
Note: the metal plate adhered directly to the back of your phone/case would interfere with wireless charging. Multiple setup options & flexible adjustment highly compatible with diverse positions on almost all car dashboards.
Suits for all the phones in the markets such as iphone 12 11 pro max XR XS Max X 8 Samsung Galaxy S10 S9 S8 Note 10 9 8 Google Pixel and small tablets, etc. 20x stronger magnetic grip with 4 neodymium n52 magnets, this mount is proven to astonishingly withstand weight up to 7.
8lb, the industry’s most powerful magnetic material, let alone hold your phone. What you get 1*getihu dashboard phone mount, 1* reinstall kit, 2* protective films, 2* Metal platesavailable for two phones, 1* Alcohol pad, 30-day money back guarantee, worry-free 3-year warranty & lifetime responsive customer care. Freely pick one of the ideal spots to install the phone mount and a 360°swiveling ball joint makes it a cinch to adjust the angle flexibly to enhanced the viewing, with one hand.
Brand | GETIHU |
Manufacturer | GETIHU |
Weight | 0.04 kg (0.08 Pounds) |
Part Number | 1 |
Model | EIGELIU |
8. VANMASS
1s Release, Phone Holder for Car Dashboard Windscreen Vent for All Mobile Phone, VANMASS 2021 Upgraded Car Phone Holder 4 in 1, Patented Fingerprint Clamps & Air Capsule Pad & Stable Air Vent Clip
VANMASS - Battery/wallet case. This phone car holder has been comprehensively optimized and upgraded based on global customer feedback, VANMASS car phone holder can be used for dashboard/air vent/windscreen, is 5X stable and flexible than other in car phone holders. Infinite viewing angleachieve the best infinite viewing angles by rotating the holder 360° horizontal and 120° arc through swivel ball joint & pivoting the telescopic arm up and down 270° and extending it from 5.
26" to 9. 81". Durable shock-absorbing carbon fiber on the phone cradle, innovative high-tech air capsule silicone rubber on the 2-side clamps and bottom feet provide TRUE All-Around Protection, ensure phone safety in an emergency braking, bumpy road or sharp turn, Never Fall offJust Press 1S release button on the side to open the clamps, and it will stay firmly at the initial position.
One-hand operation, place your phone and squeeze clamps, the phone car holder provides a strong stable hold. What we upgraded8-gear stretchable bottom feet was designed to avoid clamp arms squeezing phone power/volume buttons and phone cradle blocking multiple cameras; Strongest suction cup loads up to 44LBS, made of pure PU with Nanotechnology, very sticky and won't melt under direct sunlight; Tightest clamps by innovatively optimizing 2 engaged gears for perfect 2-side control; Industry original steel-cored 3-gear lock vent clip has 20X stability & durability.
Original design - top level configurationwith our design&material-focused coverage, vanmass breaks down the limit of innovation and security of car cradles. Friendly with smartphone 3. 5"-7.
Brand | VANMASS |
Manufacturer | VANMASS |
Part Number | CTEZ11 3 in 1 UK |
Model | CTEZ11 3 in 1 UK |
9. LISEN
AUTO Locking Phone Mount Car with Hook Like Clip Air Vent Car Mount Universal Mobile Phone Holder Compatible with iPhone and All Other Smart Phone, LISEN Phone Holder for Car
LISEN - Universal compatibility: universal car holder for cell phone will firmly hold all the smart phones 4. 7-6. 8in even with thick case 0-012inch compatible with iphone 12/12 mini/12 pro/12 pro max/11/11 pro/11 pro max/xr/x/8/7/6/5, note 9/ Galaxy S10/ S10+/ S10E/ S9/ S8 /S7 /S6 /Edge S6 /S5 and more.
2, then the clamp will lock automatically. It is quite more convenient than most of phone holders in the market which need to lock phone manually. It is benefit from the smaller sawtooth which make it support fine adjustment and holder your phone more firmly even on bumpy road.
Kindly note️: this air vent clip does not fit with round and vertical air outlets. It is recommended use for the horizonTAL VENT. They need two step: 1, Press clamp to lock. Strong clip: this air vent car phone holder is designed as “hook shape” and form “three grasp points” which can vise the outlet blades tightly.
Real one step operation: there is a locking button in front of this phone holder for car and it will be pressed while you put your phone on, put the phone on. The air vent phone holder is borned for innovation & PRACTICABILITY, it solving the market’s common problem of being easy to fall off over time. Just enjoy the wonderful using experience with LISEN vent phone holder for car. This air vent clip does not fit with round and vertical air outlets.
Brand | LISEN |
Manufacturer | LISEN |
Height | 9.8 cm (3.86 Inches) |
Length | 10.2 cm (4.02 Inches) |
Weight | 0.11 kg (0.24 Pounds) |
Width | 9.9 cm (3.9 Inches) |
Part Number | LV643 |
Model | LV643 |
10. ARH Auto Accessories
| Pack of 2, ARH Auto Accessories Projector 28 SMD 501 | W5W | T10 Sidelight Bulbs, 12 V, 8 W
ARH Auto Accessories - If it breaks simply return it to us and get a brand new item sent out the next working day. Long lasting : high precision coating and high quality with a up to 450 hours lifetime. Brighter : see up to 35% more light in comparison to a standard sidelight bulbs.
Match those hid lights : the 4500k light given out by bulbs looks closer that of HID bulbs. Free 12 month warranty - we are so confident in the quality of our products that we are now offering a FREE no questions asked warranty for the first 12 months. See further : superior light beam allows the entire headlamp to be lit.