#adLiqui Moly#ad - Pack of 2 total 500ml. Guarantees the best possible combustion. Reduces soot formation. Especially suitable for short distance and city vehicles. Extends the service life of particulate filters.
#adLiqui Moly#ad - Added to the lubricating oil of engines, compressors, pumps and transmissions. Cera tec reduces friction and wear by using chemically and thermally extremely high-resilient ceramic compounds.
Mixable with all commercially available motor oils. Cera tec is a high-tech ceramic wear protection and can be mixed with all commercially available oils. 300 ml will treat up to 5 L of motor oil. Not suitable for use with wet clutches.
#adLiqui Moly#ad - Successfully tested in international testbench investigations. To eliminate problems, we recommend mixing diesel system cleaner with fuel during refueling over a period of approximately 2, 000 km.
Add to the tank during each inspection and after carrying out repairs on the fuel system. Suitable for all diesel engine vehicles including those with Common Rail and pumped-jet injection systems. Reduces the pollutant emissions, optimizing smoke opacity before the emissions test.
#adLiqui Moly#ad - Completely effective right after adding. Accelerates soot burn-off and reduces exhaust smoke. Pour the contents of the can into the tank before filling up with fuel. Use 150 ml diesel smoke stop for 50 l diesel fuel, i.
E. Cleans the diesel injection system and makes the engine run smooth. Reduces emissions and odor nuisance. Optimizes the emission test values. 1:333. Used for all passenger and commercial vehicle engines, for buses as well as agricultural, forestry and stationary engines.
Liqui Moly#ad - Injection cleaner can be mixed with fuel at any time since mixing is spontaneous. For rectifying problems such as difficulties with starting, poor throttle response, irregular idling, performance losses, surges due to lean mixture and poor exhaust values caused by contaminated injection systems.
Injection cleaner can be mixed with fuel at any time since mixing is spontaneous. One 300 ml can is sufficient for up to 70 liters of fuel.
Eliminates start problems and rough engine running. This product is effective over 2, 000 km. Repeat treatment if problems reoccur. This product is effective over 2, 000 km. Suitable for all gasoline injection systems. One 300 ml can is sufficient for up to 70 liters of fuel. Removes deposits on injection valves, intake valves, spark plugs and in the combustion chamber and prevents them from reforming.
#adLiqui Moly#ad - Item package dimension: 5. 4cm l x 9. 5cm w x 19. 0cm H. With a long-term effect lasting around 2, add to the fuel tank every 2, 000 km. The product mixes with the fuel automatically. The contents of one 300 ml can is sufficient for up to 75 litres of fuel.
Clean engines need less fuel and reduce emissions. Improves engine running and prevents performance decrease. For preventive maintenance, 000 km. Used for petrol injection systems with or without turbocharging. Maintains and protects the entire fuel system from wear, deposits and corrosion.
Liqui Moly#ad - Create access to the intake pipe and remove contamination by means of a spray stream. Special active solvent with a high-tech additive combination for removing typical dirt and deposits in the intake and throttle valve area.
Removes contamination and deposits in the intake and throttle valve areas, which disrupt smooth engine running. Thanks to the long spray probe, the entire intake duct can be cleaned. Use of the cleaner is recommended during every inspection in order to prevent heavy deposits.